POLYMER SOLAR CELL ORANGE COUNTY, ORANGE COUNTY POLYMER SOLAR CELL, POLYMER SOLAR CELL SOLAR POWER ORANGE COUNTY CA, FREE SOLAR POWER, Residential Solar Power, Commercial Solar Power, Solar Power Systems, Mission Viejo, Orange County, Solar Power Systems Residential, Solar Energy, Free Solar Energy, Solar Power Systems For Homes,

For SOLAR POWER IN ORANGE COUNTY - Call Today (949) 488-3207
FREE Solar Power For Orange County California!
, Zero Down, Free Estimate
"The solar market is projected to grow 35 percent a year for the next three to five years." -Walter Nasdeo
Residential Solar Energy, Commercial Solar Energy, Free Solar Energy (Zero Down), Reduce Your Electric Bills With Solar Power, Mico-Inverters

Solar Power
Orange County

Zero Down Solar Made Easy!



23632 Via Fabricante, Suite F
Mission Viejo, CA 92691

(949) 488-3207

To Email Us: "Click Here"



Read About us On:

NOTE: The information and notices contained on this website are intended as general research and information and are expressly not intended, and should not be regarded, as medical, financial or legal advice. The articles are from free sources.


Best Value in SOLAR POWER

Orange County CA, Visit: OrangeCountyCA

"I'd put my money on the Sun and Solar Energy, what a source of Power! I hope we don't have to wait until oil and coal run out, before we tackle that." -Thomas Edison

"Solar energy is a clean alternative energy source. It's clear, given the current energy crisis, that we need to embrace new sources of renewable energy that are good for our planet. I believe very strongly in using technology to provide affordable options that all consumers can put into practice." -Yang Yang UCLA Engineering Professor

"We were delighted to have worked with Microsoft on its electric solar system. Microsoft is effectively lowering operating costs, reducing purchases of expensive peak electricity, and improving the health and quality of life in California through its Silicon Valley Campus solar power program." -Dan Shuga President of PowerLight




Welcome To
Solar Power Orange County


Fig. 1. Schematic of plastic solar cells. PET – polyethylene terephthalate, ITO – indium tin oxide, PEDOT:PSS – poly(3,4-ethylenedioxythiophene), active layer (usually a polymer:fullerene blend), Al – aluminium.

A polymer solar cell is a type of flexible solar cell made with polymers, large molecules with repeating structural units, that produce electricity from sunlight by the photovoltaic effect. Polymer solar cells include organic solar cells (also called "plastic solar cells"). They are one type of thin film solar cell, others include the more stable amorphous silicon solar cell.

Most commercial solar cells are made from a refined, highly purified silicon crystal, similar to the material used in the manufacture of integrated circuits and computer chips (wafer silicon). The high cost of these silicon solar cells and their complex production process generated interest in alternative technologies.

Compared to silicon-based devices, polymer solar cells are lightweight (which is important for small autonomous sensors), potentially disposable and inexpensive to fabricate (sometimes using printed electronics), flexible, customizable on the molecular level and potentially have less adverse environmental impact. Polymer solar cells also have the potential to exhibit transparency, suggesting applications in windows, walls, flexible electronics, etc. An example device is shown in Fig. 1. The disadvantages of polymer solar cells are also serious: they offer about 1/3 of the efficiency of hard materials, and experience substantial photochemical degradation.

Polymer solar cells inefficiency and stability problems, combined with their promise of low costs and increased efficiency made them a popular field in solar cell research. As of 2015, polymer solar cells were able to achieve over 10% efficiency via a tandem structure.

Device physics

Fig. 2. Polymer chain with diffusing polaron surrounded by fullerene molecules

Polymer solar cells usually consist of an electron- or hole-blocking layer on top of an indium tin oxide (ITO) conductive glass followed by electron donor and an electron acceptor (in the case of bulk heterojunction solar cells), a hole or electron blocking layer, and metal electrode on top. The nature and order of the blocking layers – as well as the nature of the metal electrode – depends on whether the cell follows a regular or an inverted device architecture. In an inverted cell, the electric charges exit the device in the opposite direction as in a normal device because the positive and negative electrodes are reversed. Inverted cells can utilize cathodes out of a more suitable material; inverted OPVs enjoy longer lifetimes than regularly structured OPVs, but they typically don’t reach efficiencies as high as regular OPVs.

In bulk heterojunction polymer solar cells, light generates excitons. Subsequent charge separation in the interface between an electron donor and acceptor blend within the device’s active layer. These charges then transport to the device’s electrodes where the charges flow outside the cell, perform work and then re-enter the device on the opposite side. The cell's efficiency is limited by several factors, especially non-geminate recombination. Hole mobility leads to faster conduction across the active layer.

Organic photovoltaics are made of electron donor and electron acceptor materials rather than semiconductor p-n junctions. The molecules forming the electron donor region of organic PV cells, where exciton electron-hole pairs are generated, are generally conjugated polymers possessing delocalized p electrons that result from carbon p orbital hybridization. These p electrons can be excited by light in or near the visible part of the spectrum from the molecule's highest occupied molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO), denoted by a p -p* transition. The energy bandgap between these orbitals determines which wavelength(s) of light can be absorbed.

Unlike in an inorganic crystalline PV cell material, with its band structure and delocalized electrons, excitons in organic photovoltaics are strongly bound with an energy between 0.1 and 1.4 eV. This strong binding occurs because electronic wave functions in organic molecules are more localized, and electrostatic attraction can thus keep the electron and hole together as an exciton. The electron and hole can be dissociated by providing an interface across which the chemical potential of electrons decreases. The material that absorbs the photon is the donor, and the material acquiring the electron is called the acceptor. In Fig. 2, the polymer chain is the donor and the fullerene is the acceptor. Even after dissociation, the electron and hole may still be joined as a "geminate pair", and an electric field is then required to separate them. The electron and hole must be collected at contacts. If charge carrier mobility is insufficient, the carriers will not reach the contacts, and instead recombine at trap sites or remain in the device as undesirable space charges that oppose the flow of new carriers. The latter problem can occur if electron and hole mobilities are not matched. In that case, space-charge limited photocurrent (SCLP) hampers device performance.

Organic photovoltaics can be fabricated with an active polymer and a fullerene-based electron acceptor. Illumination of this system by visible light leads to electron transfer from the polymer to a fullerene molecule. As a result, the formation of a photoinduced quasiparticle, or polaron (P+), occurs on the polymer chain and the fullerene becomes a radical anion (C-
). Polarons are highly mobile and can diffuse away.


The simplest organic PV device features a planar heterojunction (figure 1). A film of active polymer (donor) and a film of electron acceptor is sandwiched between contacts. Excitons created in the donor region may diffuse to the junction and separate, with the hole remaining behind and the electron passing into the acceptor. Because charge carriers have diffusion lengths of just 3–10 nm in typical organic semiconductors, planar cells must be thin, but the thin cells absorb light less well. Bulk heterojunctions (BHJs) address this shortcoming. In a BHJ, a blend of electron donor and acceptor materials is cast as a mixture, which then phase-separates. Regions of each material in the device are separated by only several nanometers, a distance suited for carrier diffusion. BHJs require sensitive control over materials morphology on the nanoscale. Important variables include materials, solvents and the donor-acceptor weight ratio.

The next logical step beyond BHJs are ordered nanomaterials for solar cells, or ordered heterojunctions (OHJs). OHJs minimize the variability associated with BHJs. OHJs are generally hybrids of ordered inorganic materials and organic active regions. For example, a photovoltaic polymer can be deposited into pores in a ceramic such as TiO2. Since holes still must diffuse the length of the pore through the polymer to a contact, OHJs suffer similar thickness limitations. Mitigating the hole mobility bottleneck is key to further enhancing device performance of OHJ's.

Active layer deposition and annealing process

Since its active layer largely determines device efficiency, this component's morphology received much attention.

If one material is more soluble in the solvent than the other, it will deposit first on top of the substrate, causing a concentration gradient through the film. This has been demonstrated for poly-3-hexyl thiophene (P3HT), phenyl-C61-butyric acid methyl ester (PCBM) devices where the PCBM tends to accumulate towards the device's bottom upon spin coating from ODCB solutions. This effect is seen because the more soluble component tends to migrate towards the “solvent rich” phase during the coating procedure, accumulating the more soluble component towards the film's bottom, where the solvent remains longer. The thickness of the generated film affects the phases segregation because the dynamics of crystallization and precipitation are different for more concentrated solutions or faster evaporation rates (needed to build thicker devices). Crystalline P3HT enrichment closer to the hole-collecting electrode can only be achieved for relatively thin (100 nm) P3HT/PCBM layers.

The gradients in the initial morphology are then mainly generated by the solvent evaporation rate and the differences in solubility between the donor and acceptor inside the blend. This dependence on solubility has been clearly demonstrated using fullerene derivatives and P3HT. When using solvents which evaporate at a slower rate (as chlorobenzene (CB) or dichlorobenzene (DCB)) you can get larger degrees of vertical separation or aggregation while solvents that evaporate quicker produce a much less effective vertical separation. Larger solubility gradients should lead to more effective vertical separation while smaller gradients should lead to more homogeneous films. These two effects were verified on P3HT:PCBM solar cells.

The solvent evaporation speed as well as posterior solvent vapor or thermal annealing procedures were also studied. Blends such as P3HT:PCBM seem to benefit from thermal annealing procedures, while others, such as PTB7:PCBM, seem to show no benefit. In P3HT the benefit seems to come from an increase of crystallinity of the P3HT phase which is generated through an expulsion of PCBM molecules from within these domains. This has been demonstrated through studies of PCBM miscibility in P3HT as well as domain composition changes as a function of annealing times.

The above hypothesis based on miscibility does not fully explain the efficiency of the devices as solely pure amorphous phases of either donor or acceptor materials never exist within bulk heterojunction devices. A 2010 paper suggested that current models that assume pure phases and discrete interfaces might fail given the absence of pure amorphous regions. Since current models assume phase separation at interfaces without any consideration for phase purity, the models might need to be changed.

The thermal annealing procedure varies depending on precisely when it is applied. Since vertical species migration is partly determined by the surface tension between the active layer and either air or another layer, annealing before or after the deposition of additional layers (most often the metal cathode) affects the result. In the case of P3HT:PCBM solar cells vertical migration is improved when cells are annealed after the deposition of the metal cathode.

Donor or acceptor accumulation next to the adjacent layers might be beneficial as these accumulations can lead to hole or electron blocking effects which might benefit device performance. In 2009 the difference in vertical distribution on P3HT:PCBM solar cells was shown to cause problems with electron mobility which ends up with the yielding of very poor device efficiencies. Simple changes to device architecture – spin coating a thin layer of PCBM on top of the P3HT – greatly enhance cell reproducibility, by providing reproducible vertical separation between device components. Since higher contact between the PCBM and the cathode is required for better efficiencies, this largely increases device reproducibility.

According to neutron scattering analysis, P3HT:PCBM blends have been described as “rivers" (P3HT regions) interrupted by “streams” (PCBM regions).

Solvent effects

Conditions for spin coating and evaporation affect device efficiency. Solvent and additives influence donor-acceptor morphology. Additives slow down evaporation, leading to more crystalline polymers and thus improved hole conductivities and efficiencies. Typical additives include 1,8-octanedithiol, ortho-dichlorobenzene, 1,8-diiodooctane (DIO), and nitrobenzene. The DIO effect was attributed to the selective solubilization of PCBM components, modifies fundamentally the average hopping distance of electrons, and thus improves electron mobility. Additives can also lead to big increases in efficiency for polymers. For HXS-1/PCBM solar cells, the effect was correlated with charge generation, transport and shelf-stability. Other polymers such as PTTBO also benefit significantly from DIO, achieving PCE values of more than 5% from around 3.7% without the additive.

Polymer Solar Cells fabricated from chloronaphthalene (CN) as a co-solvent enjoy a higher efficiency than those fabricated from the more conventional pure chlorobenzene solution. This is because the donor-acceptor morphology changes, which reduces the phase separation between donor polymer and fullerene. As a result, this translates into high hole mobilities. Without co-solvents, large domains of fullerene form, decreasing photovoltaic performance of the cell due to polymer aggregation in solution. This morphology originates from the liquid-liquid phase separation during drying; solve evaporation causes the mixture to enter into the spinodal region, in which there are significant thermal fluctuations. Large domains prevent electrons from being collected efficiently (decreasing PCE).

Small differences in polymer structure can also lead to significant changes in crystal packing that inevitably affect device morphology. PCPDTBT differs from PSBTBT caused by the difference in bridging atom between the two polymers (C vs. Si), which implies that better morphologies are achievable with PCPDTBT:PCBM solar cells containing additives as opposed to the Si system which achieves good morphologies without help from additional substances.

Self-assembled cells

Supramolecular chemistry was investigated, using donor and acceptor molecules that assemble upon spin casting and heating. Most supramolecular assemblies employ small molecules. Donor and acceptor domains in a tubular structure appear ideal for organic solar cells.

Diblock polymers containing fullerene yield stable organic solar cells upon thermal annealing. Solar cells with pre-designed morphologies resulted when appropriate supramolecular interactions are introduced.

Progress on BCPs containing polythiophene derivatives yield solar cells that assemble into well defined networks. This system exhibits a PCE of 2.04%. Hydrogen bonding guides the morphology.

Device efficiency based on co-polymer approaches have yet to cross the 2% barrier, whereas bulk-heterojunction devices exhibit efficiencies >7% in single junction configurations.

Fullerene-grafted rod-coil block copolymers have been used to study domain organization.

Supramolecular approaches to organic solar cells provide understanding about the macromolecular forces that drive domain separation.

Infrared polymer cells

Infrared cells preferentially absorb light in the infrared range rather than visible wavelengths. As of 2012, such cells can be made nearly 70% transparent to visible light. The cells allegedly can be made in high volume at low cost using solution processing. Infrared polymer cells can be used as add-on components of portable electronics, smart windows, and building-integrated photovoltaics.The cells employ silver nanowire/titanium dioxide composite films as the top electrode, replacing conventional opaque metal electrodes. With this combination, 4% power-conversion efficiency was achieved.

Near-infrared Polymer solar cells based on a copolymer of naphthodithiophene diimide and bithiophene (PNDTI-BT-DT) are also being fabricated in combination with PTB7 as an electron donor. Both PNDTI-BT-DT and PTB7 formed a crystalline structure in the blend films similar to in the pristine films, leading to the efficient charge generation contributed from both polymers.

Power Conversion Efficiency

One of the major issues surrounding polymer solar cells is the low Power Conversion Efficiency (PCE) of fabricated cells. In order to be considered commercial viable, PSCs must be able to achieve at least 10–15% efficiency—this is already much lower than inorganic PVs. However, due to the low cost of polymer solar cells, a 10–15% efficiency is commercially viable.

PCE (?) is proportional to the product of the short-circuit current (JSC), the open circuit voltage (VOC), and the fill factor (FF).

Where Pin is the incident solar power. Recent advances in polymer solar cell performance have resulted from compressing the bandgap to enhance short-circuit current while lowering the Highest Occupied Molecular Orbital (HOMO) to increase open-circuit voltage. However, PSCs still suffer from low fill factors (typically below 70%). However, as of 2013, researchers have been able to fabricate PSCs with fill factors of over 75%. Scientists have been able to accomplish via an inverted BHJ and by using nonconventional donor / acceptor combinations.


Number of scientific publications contributing to the subject “polymer solar cell(s)” by year. Search done through ISI, Web of Science.

Polymer solar cells have yet to commercially compete with silicon solar cells and other thin-film cells. The present efficiency of polymer solar cells lies near 10%, well below silicon cells. Polymer solar cells also suffer from environmental degradation, lacking effective protective coatings.

Further improvements in performance are needed to promote charge carrier diffusion; transport must be enhanced through control of order and morphology; and interface engineering must be applied to the problem of charge transfer across interfaces.

Research is being conducted into using tandem architecture in order to increase efficiency of polymer solar cells. Similar to inorganic tandem architecture, organic tandem architecture is expected to increase efficiency. Compared with a single-junction device using low-bandgap materials, the tandem structure can reduce heat loss during photon-to-electron conversion.

Polymer solar cells are not widely produced commercially. Starting in 2008, Konarka Technologies started production of polymer-fullerene solar cells. The initial modules were 3–5% efficient, and only last for a few years. Konarka has since filed for bankruptcy, as those polymer solar cells were unable to penetrate the PV market.

PSCs also still suffer from low fill factors (typically below 70%). However, as of 2013, researchers have been able to fabricate PSCs with fill factors of over 75%. Scientists have been able to accomplish via an inverted BHJ and by using nonconventional donor / acceptor combinations.

However, efforts are being made to upscale manufacturing of polymer solar cells, in order to decrease costs and also advocate for a practical approach for PSC production. Such efforts include full roll-to-roll solution processing. However, roll-to-roll solution processing is ill-suited for on-grid electricity production due to the short lifetime of polymer solar cells. Therefore, commercial applications for polymer solar cells still include primarily consumer electronics and home appliances.

Modeling organic solar cells

As discussed above, organic semiconductors are highly disordered materials with no long range order. This means that the conduction band and valance band edges are not well defined. Furthermore, this physical and energetic disorder generates trap states in which photogenerated electrons and holes can become trapped and then eventually recombine.

Key to accurately describing organic solar cells in a device model is to include carrier trapping and recombination via trap states. A commonly used approach is to use an effective medium model, where by standard drift diffusion equations are used to describe transport across the device. Then, an exponential tail of trap states is introduced which decays into the band gap from the mobility edges. To describe capture/escape from these trap states the Shockley–Read–Hall (SRH) can be used. The Shockley-Read-Hall mechanism has been shown able to reproduce polymer:fullerene device behavior in both time domain and steady state.

Other third-generation solar cells

See also


  1. ^ Joachim Luther, Michael Nast, M. Norbert Fisch, Dirk Christoffers, Fritz Pfisterer, Dieter Meissner, Joachim Nitsch "Solar Technology" 2002, Wiley-VCH, 2008 Weinheim. doi:10.1002/14356007.a24_369
  2. ^ Jørgensen, M., K. Norrman, and F.C. Krebs (2008). "Stability/degradation of polymer solar cells". Solar Energy Materials and Solar Cells 92 (7): 686. doi:10.1016/j.solmat.2008.01.005. 
  3. ^ Po, Riccardo; Carbonera, Chiara; Bernardi, Andrea; Tinti, Francesca; Camaioni, Nadia (2012). "Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area". Solar Energy Materials and Solar Cells 100: 97. doi:10.1016/j.solmat.2011.12.022. 
  4. ^ Scharber, M.?C.; Mühlbacher, D.; Koppe, M.; Denk, P.; Waldauf, C.; Heeger, A.?J.; Brabec, C.?J. (2006). "Design Rules for Donors in Bulk-Heterojunction Solar Cells—Towards 10?% Energy-Conversion Efficiency" (PDF). Advanced Materials 18 (6): 789. doi:10.1002/adma.200501717. 
  5. ^ a b You, Jingbi; Dou, Letian; Yoshimura, Ken; Kato, Takehito; Ohya, Kenichiro; Moriarty, Tom; Emery, Keith; Chen, Chun-Chao (5 February 2013). "A polymer tandem solar cell with 10.6% power conversion efficiency". Nature Communications 4: 1446. Bibcode:2013NatCo...4E1446Y. doi:10.1038/ncomms2411. PMC 3660643. PMID 23385590. 
  6. ^ Zyga, Lisa. "Inverted polymer solar cell efficiency sets world record". Phys.org. Retrieved 18 February 2015. 
  7. ^ Pivrikas, A.; Sariçiftçi, N. S.; Juška, G.; Österbacka, R. (2007). "A review of charge transport and recombination in polymer/fullerene organic solar cells" (PDF). Progress in Photovoltaics: Research and Applications 15 (8): 677. doi:10.1002/pip.791. 
  8. ^ Tessler, Nir; Preezant, Yevgeni; Rappaport, Noam; Roichman, Yohai (2009). "Charge Transport in Disordered Organic Materials and Its Relevance to Thin-Film Devices: A Tutorial Review" (PDF). Advanced Materials 21 (27): 2741. doi:10.1002/adma.200803541. 
  9. ^ Clarke, Tracey M.; Ballantyne, Amy M.; Nelson, Jenny; Bradley, Donal D. C.; Durrant, James R. (2008). "Free Energy Control of Charge Photogeneration in Polythiophene/Fullerene Solar Cells: The Influence of Thermal Annealing on P3HT/PCBM Blends". Advanced Functional Materials 18 (24): 4029. doi:10.1002/adfm.200800727. 
  10. ^ Xu, Zheng; Chen, Li-Min; Yang, Guanwen; Huang, Chun-Hao; Hou, Jianhui; Wu, Yue; Li, Gang; Hsu, Chain-Shu; Yang, Yang (2009). "Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells" (PDF). Advanced Functional Materials 19 (8): 1227. doi:10.1002/adfm.200801286. 
  11. ^ Van Bavel, Svetlana; Sourty, Erwan; De With, Gijsbertus; Frolic, Kai; Loos, Joachim (2009). "Relation between Photoactive Layer Thickness, 3D Morphology, and Device Performance in P3HT/PCBM Bulk-Heterojunction Solar Cells". Macromolecules 42 (19): 7396. doi:10.1021/ma900817t. 
  12. ^ Troshin, Pavel A.; Hoppe, Harald; Renz, Joachim; Egginger, Martin; Mayorova, Julia Yu.; Goryachev, Andrey E.; Peregudov, Alexander S.; Lyubovskaya, Rimma N.; Gobsch, Gerhard; Sariciftci, N. Serdar; Razumov, Vladimir F. (2009). "Material Solubility-Photovoltaic Performance Relationship in the Design of Novel Fullerene Derivatives for Bulk Heterojunction Solar Cells" (PDF). Advanced Functional Materials 19 (5): 779. doi:10.1002/adfm.200801189. 
  13. ^ a b Moulé, A.J. & K. Meerholz (2008). "Controlling Morphology in Polymer–Fullerene Mixtures" (PDF). Advanced Materials 20 (2): 240. doi:10.1002/adma.200701519. 
  14. ^ Dang, Minh Trung; Wantz, Guillaume; Bejbouji, Habiba; Urien, Mathieu; Dautel, Olivier J.; Vignau, Laurence; Hirsch, Lionel (2011). "Polymeric solar cells based on P3HT:PCBM: Role of the casting solvent". Solar Energy Materials and Solar Cells 95 (12): 3408. doi:10.1016/j.solmat.2011.07.039. 
  15. ^ Nagarjuna, Gavvalapalli; Venkataraman, Dhandapani (2012). "Strategies for controlling the active layer morphologies in OPVs". Journal of Polymer Science Part B: Polymer Physics 50 (15): n/a. Bibcode:2012JPoSB..50.1045N. doi:10.1002/polb.23073. 
  16. ^ Matthias A. Ruderer & Peter Müller-Buschbaum (2011). "Morphology of polymer-based bulk heterojunction films for organic photovoltaics". Soft Matter 7 (12): 5482. Bibcode:2011SMat....7.5482R. doi:10.1039/C0SM01502D. 
  17. ^ Treat, Neil D.; Brady, Michael A.; Smith, Gordon; Toney, Michael F.; Kramer, Edward J.; Hawker, Craig J.; Chabinyc, Michael L. (2011). "Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend". Advanced Energy Materials 1: 82. doi:10.1002/aenm.201000023. ; Treat, Neil D.; Brady, Michael A.; Smith, Gordon; Toney, Michael F.; Kramer, Edward J.; Hawker, Craig J.; Chabinyc, Michael L. (2011). "Correction: Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend (Adv. Energy Mater. 2/2011)". Advanced Energy Materials 1 (2): 145. doi:10.1002/aenm.201190008. 
  18. ^ Kozub, Derek R.; Vakhshouri, Kiarash; Orme, Lisa M.; Wang, Cheng; Hexemer, Alexander; Gomez, Enrique D. (2011). "Polymer Crystallization of Partially Miscible Polythiophene/Fullerene Mixtures Controls Morphology". Macromolecules 44 (14): 5722. doi:10.1021/ma200855r. 
  19. ^ Jo, Jang; Kim, Seok-Soon; Na, Seok-In; Yu, Byung-Kwan; Kim, Dong-Yu (2009). "Time-Dependent Morphology Evolution by Annealing Processes on Polymer:Fullerene Blend Solar Cells". Advanced Functional Materials 19 (6): 866. doi:10.1002/adfm.200800968. 
  20. ^ Collins, Brian A.; Gann, Eliot; Guignard, Lewis; He, Xiaoxi; McNeill, Christopher R.; Ade, Harald (2010). "Molecular Miscibility of Polymer-Fullerene Blends" (PDF). The Journal of Physical Chemistry Letters 1 (21): 3160. doi:10.1021/jz101276h.  Supporting information
  21. ^ Tremolet De Villers, Bertrand; Tassone, Christopher J.; Tolbert, Sarah H.; Schwartz, Benjamin J. (2009). "Improving the Reproducibility of P3HT:PCBM Solar Cells by Controlling the PCBM/Cathode Interface". The Journal of Physical Chemistry C 113 (44): 18978. doi:10.1021/jp9082163. 
  22. ^ Yin, W. and M. Dadmun, "A New Model for the Morphology of P3HT/PCBM Organic Photovoltaics from Small-Angle Neutron Scattering: Rivers and Streams" ACS Nano, 2011, volume 5, p. 4756-4768.
  23. ^ Nilsson, Svante; Bernasik, Andrzej; Budkowski, Andrzej; Moons, Ellen (2007). "Morphology and Phase Segregation of Spin-Casted Films of Polyfluorene/PCBM Blends". Macromolecules 40 (23): 8291. Bibcode:2007MaMol..40.8291N. doi:10.1021/ma070712a. 
  24. ^ Lecover, Rachel; Williams, Nicholas; Markovic, Nina; Reich, Daniel H.; Naiman, Daniel Q.; Katz, Howard E. (2012). "Next-Generation Polymer Solar Cell Materials: Designed Control of Interfacial Variables". ACS Nano 6 (4): 2865–70. doi:10.1021/nn301140w. PMID 22444948. 
  25. ^ Pivrikas, Almantas; Neugebauer, Helmut; Sariciftci, Niyazi Serdar (2011). "Influence of processing additives to nano-morphology and efficiency of bulk-heterojunction solar cells: A comparative review". Solar Energy 85 (6): 1226. Bibcode:2011SoEn...85.1226P. doi:10.1016/j.solener.2010.10.012. 
  26. ^ Yao, Yan; Hou, Jianhui; Xu, Zheng; Li, Gang; Yang, Yang (2008). "Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells" (PDF). Advanced Functional Materials 18 (12): 1783. doi:10.1002/adfm.200701459. 
  27. ^ Lee, Jae Kwan; Ma, Wan Li; Brabec, Christoph J.; Yuen, Jonathan; Moon, Ji Sun; Kim, Jin Young; Lee, Kwanghee; Bazan, Guillermo C.; Heeger, Alan J. (2008). "Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells". Journal of the American Chemical Society 130 (11): 3619–23. doi:10.1021/ja710079w. PMID 18288842. 
  28. ^ Rogers, James T.; Schmidt, Kristin; Toney, Michael F.; Bazan, Guillermo C.; Kramer, Edward J. (2012). "Time-Resolved Structural Evolution of Additive-Processed Bulk Heterojunction Solar Cells". Journal of the American Chemical Society 134 (6): 2884–7. doi:10.1021/ja2104747. PMID 22276735. 
  29. ^ Carr Hoi Yi Ho, Qi Dong, Hang Yin, Winky Wing Ki Leung, Qingdan Yang, Harrison Ka Hin Lee, Sai Wing Tsang and Shu Kong So (2015). "Impact of Solvent Additive on Carrier Transport in Polymer:Fullerene Bulk Heterojunction Photovoltaic Cells". Advanced Materials Interfaces 2 (12): n/a. doi:10.1002/admi.201500166. 
  30. ^ Liang, Yongye; Xu, Zheng; Xia, Jiangbin; Tsai, Szu-Ting; Wu, Yue; Li, Gang; Ray, Claire; Yu, Luping (2010). "For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%". Advanced Materials 22 (20): E135–8. doi:10.1002/adma.200903528. PMID 20641094. 
  31. ^ Li, Weiwei; Zhou, Yi; Viktor Andersson, B.; Mattias Andersson, L.; Thomann, Yi; Veit, Clemens; Tvingstedt, Kristofer; Qin, Ruiping; Bo, Zhishan; Inganäs, Olle; Würfel, Uli; Zhang, Fengling (2011). "The Effect of additive on performance and shelf-stability of HSX-1/PCBM photovoltaic devices". Organic Electronics 12 (9): 1544. doi:10.1016/j.orgel.2011.05.028. 
  32. ^ van Franekar, Jacobus; Turbiez, Mathieu; Li, Weiwei; Wienk, Martijn; Janssen, René (6 February 2015). "A real-time study of the benefits of co-solvents in polymer solar cell processing". Nature Communications 6: 6229. Bibcode:2015NatCo...6E6229V. doi:10.1038/ncomms7229. PMID 25656313. 
  33. ^ Beaujuge, P.M. & J.M.J. Fréchet (2011). "Molecular Design and Ordering Effects in p-Functional Materials for Transistor and Solar Cell Applications". Journal of the American Chemical Society 133 (50): 20009–29. doi:10.1021/ja2073643. PMID 21999757. 
  34. ^ Troshin, Pavel A.; Koeppe, Robert; Peregudov, Alexander S.; Peregudova, Svetlana M.; Egginger, Martin; Lyubovskaya, Rimma N.; Sariciftci, N. Serdar (2007). "Supramolecular Association of Pyrrolidinofullerenes Bearing Chelating Pyridyl Groups and Zinc Phthalocyanine for Organic Solar Cells". Chemistry of Materials 19 (22): 5363. doi:10.1021/cm071243u. 
  35. ^ Tevis, Ian D.; Tsai, Wei-Wen; Palmer, Liam C.; Aytun, Taner; Stupp, Samuel I. (2012). "Grooved Nanowires from Self-Assembling Hairpin Molecules for Solar Cells". ACS Nano 6 (3): 2032–40. doi:10.1021/nn203328n. PMID 22397738. 
  36. ^ Dössel, L.F.; Kamm, Valentin; Howard, Ian A.; Laquai, Frédéric; Pisula, Wojciech; Feng, Xinliang; Li, Chen; Takase, Masayoshi; et al. (2012). "Synthesis and Controlled Self-Assembly of Covalently Linked Hexa-peri-hexabenzocoronene/Perylene Diimide Dyads as Models To Study Fundamental Energy and Electron Transfer Processes". Journal of the American Chemical Society 134 (13): 5876–86. doi:10.1021/ja211504a. PMID 22394147. 
  37. ^ Miyanishi, Shoji; Zhang, Yue; Tajima, Keisuke; Hashimoto, Kazuhito (2010). "Fullerene attached all-semiconducting diblock copolymers for stable single-component polymer solar cells". Chemical Communications 46 (36): 6723–5. doi:10.1039/C0CC01819H. PMID 20717605. 
  38. ^ Sary, Nicolas; Richard, Fanny; Brochon, Cyril; Leclerc, Nicolas; Lévêque, Patrick; Audinot, Jean-Nicolas; Berson, Solenn; Heiser, Thomas; et al. (2010). "A New Supramolecular Route for Using Rod-Coil Block Copolymers in Photovoltaic Applications". Advanced Materials 22 (6): 763–8. doi:10.1002/adma.200902645. PMID 20217786. 
  39. ^ Lin, Ying; Lim, Jung Ah; Wei, Qingshuo; Mannsfeld, Stefan C. B.; Briseno, Alejandro L.; Watkins, James J. (2012). "Cooperative Assembly of Hydrogen-Bonded Diblock Copolythiophene/Fullerene Blends for Photovoltaic Devices with Well-Defined Morphologies and Enhanced Stability". Chemistry of Materials 24 (3): 622. doi:10.1021/cm203706h. 
  40. ^ Topham, Paul D.; Parnell, Andrew J.; Hiorns, Roger C. (2011). "Block copolymer strategies for solar cell technology". Journal of Polymer Science Part B: Polymer Physics 49 (16): 1131. doi:10.1002/polb.22302. 
  41. ^ Barrau, Sophie; Heiser, Thomas; Richard, Fanny; Brochon, Cyril; Ngov, Chheng; Van De Wetering, Karin; Hadziioannou, Georges; Anokhin, Denis V.; Ivanov, Dimitri A. (2008). "Self-Assembling of Novel Fullerene-Grafted Donor–Acceptor Rod-Coil Block Copolymers". Macromolecules 41 (7): 2701. Bibcode:2008MaMol..41.2701B. doi:10.1021/ma7022099. 
  42. ^ "Scientists create highly transparent solar cells for windows that generate electricity". Phys.org. Retrieved 2012-07-23. 
  43. ^ Zhou, Erjun; Nakano, Masahiro; Izawa, Seiichiro; Cong, Junzi; Osaka, Itaru; Takimiya, Kazuo; Tajima, Keisuke (18 August 2014). "All-Polymer Solar Cell with High Near-Infrared Response Based on a Naphthodithiophene Diimide (NDTI) Copolymer". ACS Macro Lett. 3 (9): 872. doi:10.1021/mz5004272. 
  44. ^ a b Guo, Xugang; Zhou, Nanjia; Lou, Sylvia; Smith, Jeremy; Tice, Daniel; Hennek, Jonathan; Ortiz, Rocío; López Navarrete, Juan; Li, Shuyou; Strzalka, Joseph; Chen, Lin; Chang, Robert; Facchetti, Antonio; Marks, Tobin (11 August 2013). "Polymer solar cells with enhanced fill factors". Nature Photonics 7 (10): 825. Bibcode:2013NaPho...7..825G. doi:10.1038/nphoton.2013.207. 
  45. ^ For a similar graph, see: Hoppe, Harald; Sariciftci, N. Serdar (2008). "Polymer Solar Cells". Photoresponsive Polymers II. pp. 1–86 (4). doi:10.1007/12_2007_121. ISBN 978-3-540-69452-6. 
  46. ^ Kevin Bullis. Mass Production of Plastic Solar Cells, Technology Review Magazine, October 17, 2008.
  47. ^ Krebs, Frederik; Tromholt, Thomas; Jørgensen, Mikkel (4 May 2010). "Upscaling of polymer solar cell fabrication using full roll-to-roll processing". Nanoscale 2 (6): 873. Bibcode:2010Nanos...2..873K. doi:10.1039/B9NR00430K. PMID 20648282. 
  48. ^ a b MacKenzie, Roderick C. I.; Shuttle, Christopher G.; Chabinyc, Michael L.; Nelson, Jenny (2012). "Extracting Microscopic Device Parameters from Transient Photocurrent Measurements of P3HT:PCBM Solar Cells". Advanced Energy Materials 2 (6): 662. doi:10.1002/aenm.201100709. 

Further reading

  • N.S. Sariciftci, L. Smilowitz, A.J. Heeger,F. Wudl, Photoinduced Electron Transfer from Conducting Polymers onto Buckminsterfullerene, Science 258, (1992) 1474
  • N.S. Sariciftci, A.J. Heeger, Photophysics, charge separation and device applications of conjugated polymer/fullerene composites, in Handbook of Organic Conductive Molecules and Polymers, edited by H.S.Nalwa, 1, Wiley, Chichester, New York, 1997, Ch. 8, p.p. 413–455
  • „Plastic Solar Cells“ Christoph J. Brabec, N. Serdar Sariciftci, Jan Kees Hummelen, Advanced Functional Materials, Vol. 11 No: 1, pp. 15–26 (2001)
  • Organic Photovoltaics”, Christoph Brabec, Vladimir Dyakonov, Jürgen Parisi and Niyazi Serdar Sariciftci (eds.), Springer Verlag (2003) ISBN 3-540-00405X
  • Organic Photovoltaics: Mechanisms, Materials, and Devices (Optical Engineering), (Sam-Shajing Sun and Niyazi Serdar Sariciftci (eds.), CRC Press (Taylor&Francis Group) ISBN 0-8247-5963-X, Boca Raton, 2005
  • A. Mayer, S. Scully, B. Hardin, M. Rowell, M. McGehee, Polymer-based solar cells, Materials Today 10, (2007) 28. doi:10.1016/S1369-7021(07)70276-6
  • H. Hoppe and N. S. Sariciftci, Polymer Solar Cells, p. 1–86, in Photoresponsive Polymers II, Eds.: S. R. Marder and K.-S. Lee, Advances in Polymer Science, Springer, ISBN 978-3-540-69452-6, Berlin-Heidelberg (2008)

External links


Any Questions? Please give us a call: (949) 488-3207
Please let us know what your questions are, how we can help you. Remember, we are only a phone call away.



Orange County is a county in Southern California, United States. Its county seat is Santa Ana. According to the 2000 Census, its population was 2,846,289, making it the second most populous county in the state of California, and the fifth most populous in the United States. The state of California estimates its population as of 2007 to be 3,098,121 people, dropping its rank to third, behind San Diego County. Thirty-four incorporated cities are located in Orange County; the newest is Aliso Viejo.

Unlike many other large centers of population in the United States, Orange County uses its county name as its source of identification whereas other places in the country are identified by the large city that is closest to them. This is because there is no defined center to Orange County like there is in other areas which have one distinct large city. Five Orange County cities have populations exceeding 170,000 while no cities in the county have populations surpassing 360,000. Seven of these cities are among the 200 largest cities in the United States.

Orange County is also famous as a tourist destination, as the county is home to such attractions as Disneyland and Knott's Berry Farm, as well as sandy beaches for swimming and surfing, yacht harbors for sailing and pleasure boating, and extensive area devoted to parks and open space for golf, tennis, hiking, kayaking, cycling, skateboarding, and other outdoor recreation. It is at the center of Southern California's Tech Coast, with Irvine being the primary business hub.

The average price of a home in Orange County is $541,000. Orange County is the home of a vast number of major industries and service organizations. As an integral part of the second largest market in America, this highly diversified region has become a Mecca for talented individuals in virtually every field imaginable. Indeed the colorful pageant of human history continues to unfold here; for perhaps in no other place on earth is there an environment more conducive to innovative thinking, creativity and growth than this exciting, sun bathed valley stretching between the mountains and the sea in Orange County.

Orange County was Created March 11 1889, from part of Los Angeles County, and, according to tradition, so named because of the flourishing orange culture. Orange, however, was and is a commonplace name in the United States, used originally in honor of the Prince of Orange, son-in-law of King George II of England.

Incorporated: March 11, 1889
Legislative Districts:
* Congressional: 38th-40th, 42nd & 43
* California Senate: 31st-33rd, 35th & 37
* California Assembly: 58th, 64th, 67th, 69th, 72nd & 74

County Seat: Santa Ana
County Information:
Robert E. Thomas Hall of Administration
10 Civic Center Plaza, 3rd Floor, Santa Ana 92701
Telephone: (714)834-2345 Fax: (714)834-3098
County Government Website: http://www.oc.ca.gov


City of Aliso Viejo, 92653, 92656, 92698
City of Anaheim, 92801, 92802, 92803, 92804, 92805, 92806, 92807, 92808, 92809, 92812, 92814, 92815, 92816, 92817, 92825, 92850, 92899
City of Brea, 92821, 92822, 92823
City of Buena Park, 90620, 90621, 90622, 90623, 90624
City of Costa Mesa, 92626, 92627, 92628
City of Cypress, 90630
City of Dana Point, 92624, 92629
City of Fountain Valley, 92708, 92728
City of Fullerton, 92831, 92832, 92833, 92834, 92835, 92836, 92837, 92838
City of Garden Grove, 92840, 92841, 92842, 92843, 92844, 92845, 92846
City of Huntington Beach, 92605, 92615, 92646, 92647, 92648, 92649
City of Irvine, 92602, 92603, 92604, 92606, 92612, 92614, 92616, 92618, 92619, 92620, 92623, 92650, 92697, 92709, 92710
City of La Habra, 90631, 90632, 90633
City of La Palma, 90623
City of Laguna Beach, 92607, 92637, 92651, 92652, 92653, 92654, 92656, 92677, 92698
City of Laguna Hills, 92637, 92653, 92654, 92656
City of Laguna Niguel
, 92607, 92677
City of Laguna Woods, 92653, 92654
City of Lake Forest, 92609, 92630, 92610
City of Los Alamitos, 90720, 90721
City of Mission Viejo, 92675, 92690, 92691, 92692, 92694
City of Newport Beach, 92657, 92658, 92659, 92660, 92661, 92662, 92663
City of Orange, 92856, 92857, 92859, 92861, 92862, 92863, 92864, 92865, 92866, 92867, 92868, 92869
City of Placentia, 92870, 92871
City of Rancho Santa Margarita, 92688, 92679
City of San Clemente, 92672, 92673, 92674
City of San Juan Capistrano, 92675, 92690, 92691, 92692, 92693, 92694
City of Santa Ana, 92701, 92702, 92703, 92704, 92705, 92706, 92707, 92708, 92711, 92712, 92725, 92728, 92735, 92799
City of Seal Beach, 90740
City of Stanton, 90680
City of Tustin, 92780, 92781, 92782
City of Villa Park, 92861, 92867
City of Westminster, 92683, 92684, 92685
City of Yorba Linda, 92885, 92886, 92887

Noteworthy communities Some of the communities that exist within city limits are listed below: * Anaheim Hills, Anaheim * Balboa Island, Newport Beach * Corona del Mar, Newport Beach * Crystal Cove / Pelican Hill, Newport Beach * Capistrano Beach, Dana Point * El Modena, Orange * French Park, Santa Ana * Floral Park, Santa Ana * Foothill Ranch, Lake Forest * Monarch Beach, Dana Point * Nellie Gail, Laguna Hills * Northwood, Irvine * Woodbridge, Irvine * Newport Coast, Newport Beach * Olive, Orange * Portola Hills, Lake Forest * San Joaquin Hills, Laguna Niguel * San Joaquin Hills, Newport Beach * Santa Ana Heights, Newport Beach * Tustin Ranch, Tustin * Talega, San Clemente * West Garden Grove, Garden Grove * Yorba Hills, Yorba Linda * Mesa Verde, Costa Mesa

Unincorporated communities These communities are outside of the city limits in unincorporated county territory: * Coto de Caza * El Modena * Ladera Ranch * Las Flores * Midway City * Orange Park Acres * Rossmoor * Silverado Canyon * Sunset Beach * Surfside * Trabuco Canyon * Tustin Foothills

Adjacent counties to Orange County Are: * Los Angeles County, California - north, west * San Bernardino County, California - northeast * Riverside County, California - east * San Diego County, California - southeast



"An honest answer is the sign of true friendship."

We receive many customers from across the world including people from the following cities:

Aliso Viejo 92656, 92698, Anaheim 92801, 92802, 92803, 92804, 92805, 92806, 92807, 92808, 92809, 92812, 92814, 92815, 92816, 92817, 92825, 92850, 92899, Atwood, 92811, Brea, 92821, 92822,92823, Buena Park, 90620 ,90621,90622, 90624, Capistrano Beach, 92624, Corona del Mar, 92625, Costa Mesa, 92626, 92627, 92628, Cypress, 90630, Dana Point, 92629, East Irvine, 92650, El Toro, 92609, Foothill Ranch, 92610, Fountain Valley, 92708, 92728, Fullerton, 92831, 92832, 92833, 92834, 92835, 92836, 92837, 92838, Garden Grove, 92840, 92841, 92842, 92843 ,92844, 92845, 92846, Huntington Beach , 92605, 92615, 92646, 92647, 92648, 92649, Irvine, 92602, 92603, 92604, 92606, 92612, 92614, 92616, 92617, 92618, 92619, 92620, 92623, 92697, La Habra, 90631, 90632, 90633, La Palma, 90623, Ladera Ranch, 92694, Laguna Beach , 92651, 92652, Laguna Hills ,92653, 92654,92607,92677, Laguna Woods, 92637, Lake Forest, 92630, Los Alamitos, 90720, 90721, Midway City, 92655, Mission Viejo, 92690, 92691, 92692,Newport Beach , 92658, 92659, 92660, 92661, 92662, 92663, 92657,
Orange, 92856, 92857, 92859, 92862, 92863, 92864, 92865, 92866, 92867, 92868, 92869, Placentia, 92870, 92871, Rancho Santa Margarita 92688, San Clemente, 92672, 92673, 92674, San Juan Capistrano, 92675, 92693,
Santa Ana , 92701, 92702, 92703, 92704, 92705 ,92706, 92707, 92711, 92712, 92725.92735, 92799, Seal Beach , 90740, Silverado 92676, Stanton, 90680, Sunset Beach 90742, Surfside 90743, Trabuco Canyon, 92678, 92679,Tustin ,92780, 92781,92782, Villa Park, 92861,Westminster, 92683, 92684, 92685, Yorba Linda, 92885, 92886, 92887

This Institution was Awarded
Best Value in Solar Energy

Orange County CA, Visit: OrangeCountyCABusinessDirectory.com

Solar Power Orange County
Call (949) 488-3207

Website: SolarPowerOrangeCountyCA.com

� 2013 Solar Power Orange County, 23632 Via Fabricante, Suite F, Suite D, Fullerton, California 92831

POLYMER SOLAR CELL ORANGE COUNTY, ORANGE COUNTY POLYMER SOLAR CELL, POLYMER SOLAR CELL SOLAR POWER ORANGE COUNTY CA, FREE SOLAR POWER, Residential Solar Power, Commercial Solar Power, Solar Power Systems, Mission Viejo, Orange County, Solar Power Systems Residential, Solar Energy, Free Solar Energy, Solar Power Systems For Homes, California Solar Systems, Zero Down Solar Systems, Solar Panel Installation, Solar Pannels, Buy Solar, Free Energy, Free Electricity, Alternative Energy, Solar, Panels, Power, Sun, Green Energy, CA

Solar Power, Solar Panels, Alternate Energy, System Monitoring